HOMO - Parkhomov reactor sample tests
MFMP to start testing marathon off with tests of ash and reactor samples from reported and unreported Parkhomov reactors...
Tomorrow, some samples will be tested at the Masaryk University Brno using MALDI TOF MS, to see what this is about, go here.
Bob Greenyer and Alan Goldwater will be in observers.
We had a funding requirement for these tests, however, we are very happy to report that Nicolas Chauvin, CEO of LENR Cars has met the $3000 call - a big thank you to Nicolas for enabling these tests to go ahead promptly!
-
Outer wall of the “Protok 6” reactor before operation
-
Outer wall after working in the “Protok 6” reactor
-
Internal tube after working in the “KV 3” reactor
-
Internal tube of the “KV 3” reactor before operation
-
Boron nitride after working in the “SK 4” reactor
-
Boron nitride before operation in the “SK 4” reactor
-
Fuel after operation in the “KV 3” reactor
Comments
선박 간결한 최고 품질의 물품을 정밀하고 놀라운 장소를 확인 새로운 연결.
대체 접근 방식을 보 메뉴에서 다음을 보는
사
가슴을 담았고
for revisiting. I surorise how a lot attempt you set to make the sort
of fantastic informative website.
Here is my homepage ... xrea.com: http://inuu.k2.xrea.com/aska/aska.cgi/www.myleselectronics.com/aska.c%0Agi%3ESniper
At this laser energy it sees ions, like Ni2, Cu2 etc nothing much below 100 with an Mz accuracy of 1 decimal place
https://goo.gl/mBLfuh
Here is the same sample after HCl etch, water and methanol wash.
https://goo.gl/EAg9zq
You can analyse the data with this free tool - let us know what you think is going on!
http://www.mmass.org/download/
RSS feed for comments to this post