FacebookTwitterDiggStumbleuponGoogle BookmarksRedditTechnoratiLinkedin

ECCO [UPDATE #1 - Working collaborative documents]

Scritto da Robert Greenyer on .

An instant on/off ultrasonically fluidised dusty plasma New Fire reactor

Second technical interview

Coupling ultrasonics to an alumina reactor core

Reactor core layout

New fire individual reactor core cross-section and operation

SEM / EDX grouped into pdf for easy cross-referencing

Could it work like this?

Is the foil making process also making Silver?

Direct Paypal address is:
Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.

Bank details here

Donations of any size can be made direct to Quantum Heat C.I.C.s (the organisation that runs the MFMP) bank account here, thus saving charges:

Branch Address: 153 North Street Brighton, East Sussex, BN1 1SW
Account Name: Quantum Heat C.I.C
Sort Code: 40-14-03
Acc No.: 12631571
IBAN: GB48MIDL40140312631571

Bitcoin: 1JesTRUXU8jHb1haa1MoF2NvrU8gt5msCr

UPDATE #1 - Working collaborative documents

We have a number of documents being drafted where we are developing the testing protocol and investigating which equipment to bring. We welcome your input below


0 #22 FirstEzekiel 2017-10-02 14:42
I have noticed you don't monetize your page,
don't waste your traffic, you can earn additional cash every month because you've got hi quality
content. If you want to know how to make extra money, search for:
Mrdalekjd methods for $$$
0 #21 Robert Greenyer 2017-06-14 15:01
Hi Tim,

Maximum input is said to be 1080W
0 #20 Tim 2017-05-08 00:45
Just a quick calculation with available information (after 5 minutes to reach steady state):

LENR Reactor with COP of 8, should heat about 1.7 Liters of water form 28 C to 95 C (delta 67 C) in one minute.

Or 1.7 L/min water Output at 95 C (input temp 28 C) this would demonstrate a COP of 8, if power input is about 1000 Watts.

Does Suhas currently have a flow rate estimation?
0 #19 Tim Reese 2017-05-06 23:08
Just to clarify...ECCO

What is the total power input, ECCO reactor?
1100 watts?

Is there a flow meter at the water input?

What is the water volume of system and flow rate?

Is there a standard to verify the resistive heating of water?
0 #18 Robert Greenyer 2017-04-21 11:49
Nice find Eros, Think we will get one...

0 #17 Robert Greenyer 2017-04-20 20:06
ECCO - Making nickel foil for reactor discharge electrodes

This article details the process to make the Nickel foil used in the ECCO reactor core that acts as an electrode and a breathable fuel barrier.

0 #16 eros 2017-04-18 17:42
Cheaper RF meter only 0.1-8Ghz
0 #15 eros 2017-04-17 09:44
Thank you. Drop link here when foil document is ready
0 #14 Robert Greenyer 2017-04-14 22:29

Will write document on foil production process tomorrow - bit delayed - hope to do it Sunday.
0 #13 eros 2017-04-14 18:27
Hello, transmutations sites/areas is it posible to get more magnification? In Me365 sem pictures smaller scale - bubles are visible. Near Au maybe lot of NAE's..?
Coloured elemental picture from transmutated foil side are nice to get too.. Give idea how much foil total have Au.
Back side have some Pb, Do Suhas use Pb anode?
Ni foil, how much stripping ultrasonic power (power input & probe head area?) How ultrasonic-hydr ogen-plasma is done for foil? Before or after stripping?
How thick Ni foil is, it is not mentioned in documents(??) If got deposition time from Suhas it is posible to calculate deposition current..

Add comment

Here is your generous contributions so far towards our $500,000 target, thanks everyone! : $45,020   Please Donate
See the current state of our booked costs here