FacebookTwitterDiggStumbleuponGoogle BookmarksRedditTechnoratiLinkedin

DogBone Week

Geschrieben von Ryan Hunt am .

Plan for Dogbone Week

Bob Greenyer and Alan Goldwater are here to help execute a rapid series of live experiments.  We have assembled all the test equipment we had hoped for.  Now it is time to see how they work together.  We have an ambitious plan with several tests, but the thermal assessment is the top priority. In the event that we run into some serious snags, be prepared for the plans to change and tests to be dropped.

How do you interact?  Live streaming links will be announced on facebook and int he comments below.  Add comments below and on the comment section of the YouTube live streaming.  It will be low bandwidth, unfortunately.  Maybe next time a lab located where high bandwidth is readily available will run some experiments.

Time Line:

Tests are defined in more detail below.

Monday, Feb 2

Team assembles, Test equipment set up, integrated, and prepared.  Lots of reading the manuals!

Tuesday

Starting at 9 am local time, or so.

Test 1:  Calibration with Thermocouples, Optris camera, and Williamson Pyrometer.

livelink: http://youtu.be/0DY4TJmCJS8

Test 2:  Fat coil dog bone with internal heat source


Test 3:  Assessment of Alan’s calibrated alumina temperature sources

Wednesday

Test 4:  Powder Test in sealed Alumina tube


Tests 5, 6, 7, ...:  Powder Test in sealed Alumina tube

  • Iterate and try different ideas while we have the team assembled

Thursday

Test X:  High Temp Inconel Heater Dogbone Calibration


Other tests as deemed worthy

Friday, Feb 6

Team Leaves, wrap up

Beyond:

Discuss and write up






Assess the thermal evaluation made during the Lugano tests with the optris camera - original notes here: http://www.quantumheat.org/index.php/en/experiements/active-experiments/pdb

 

  • Key questions to answer:

    • How well did the emissivity curve they used match various samples of our cast and purchased alumina?

    • Can the Williamson Pyrometer add insight about the actual emissivity and surface temperature?

    • With our best guess of alumina emissivity, how well can we match what the thermocouple is reading?

    • Does the pattern seen in the IR picture in the Lugano report indicated heat coming from inside making the brighter areas the spaces between the heater coils?

    • Does the Parkhomov report mean we may be able to see excess energy in a dog bone?




Tests Planned for DogBone Week  Feb 3 - 6, 2015

 

Test 1:  Calibration with Thermocouples, Optris camera, and Williamson Pyrometer.

 

Objectives:

  • Collect thermal camera data in ten zones just like in the Lugano report for post processing compared to actual input power

  • measure at several temperatures to develop curves

  • Assess emissivity of our dogbone over temperatures.

  • Expose as many little details as we can about what is involved in the thermal behavior of this apparatus for people to consider

Equipment:

  • Optris PI-160 thermal camera calibrated up to 1500C

  • PCE 830 power analyzer

  • Williamson P90 dual wavelength point pyrometer

  • HUGnetLab for data acquisition

    • T_ext - Type K thermocouple with bare leads - on outside of shell held on by nichrome wire

    • Type B - Type B thermocouple with bare leads - on outside of shell held on by nichrome wire

    • T_int - Type B thermocouple on inside of the dogbone

    • T_ambient - Type K thermocouple

  • United Automation Limited Single Phase 12KW Power controller

  • Dogbone cast with 18g Kanthal wire heating element (same one from live December test

  • Experiment live streaming computer aggregating power data, thermocouple data, pyrometer data, and thermal data in a video stream

 

Set up:  see video description and still images

 

Test Plan:

  • Establish dot of 0.95 emissivity, Aremco 840-CM high temperature within hottest zone

  • Designate 10 thermal zones in Optris Software (PI Connect) and set emissivity to 0.95

  • Step power up in 200 watt steps to 800W, and then 100 W steps up to 100 or 1200 trying not to damage the heating coil in this dogbone.

    • take thermal image data for post analysis

    • Capture thermocouple data and pyrometer data from analog output

    • Compare to temperature reading from pyrometer.

  • Limitations:  Because this coil is unable to reach much more than 1300C and we have seen a notable difference between internal temperature and external temperature, we will be unable to actually achieve a surface temperature of 1400C, like was reported by Levi et al on Rossi’s device.  We had tried to cast 2 dogbones with silicon carbide elements in them, but 2 out of 3 coils broke and the third was reserved for achieving high temperatures in powder tests, instead.




Test 2:  Fat coil dog bone with internal heat source

 

Objectives:

  • Qualitative assessment of appearance when a dogbone made with fat coils of Kanthal is heated from both the main coil and a coil inside to add insight to the meaning of the image from the Lugano report.

Equipment:

  • Dogbone cast with a heater made of 4mm diameter Kanthal in a coil.

  • Fat coil power supply

    • Variac transformer 120V

    • 10:1 step down transformer

    • Voltage and current handheld meters

  • Internal heater made from 18g Kanthal wrapped on an alumina tube and a type B thermocouple in the middle.

    • United Automation Limited Single Phase 12KW Power controller

    • PCE 830 power analyzer

  • Optris Thermal Camera

  • Visible cameras

 

Set up:  Insert photo

 

Test Plan:

  • This is a relatively quick and dirty test.  It is limited by the very low resistance of the heater coil and the very high currents required.  Upper power for the fat coils will be limited, but the internal power will be able to make up the difference and add illumination from within.  We will take pictures and make observations



Test 3:  Assessment of Alan’s calibrated alumina temperature sources

 

Objectives:

  • Use Alan’s nicely fabricated and controlled heat sources within alumina tubes to compare the function of the Optris thermal camera and the Williamson pyrometer in order to better understand the issues of measuring temperature of and through alumina

Equipment:

  • Optris Thermal Camera

  • Williamson P90 dual wavelength point pyrometer

  • Visible cameras

 

Set up:  Insert photo

  • Alan Goldwater put together a device that simultaneously maintains 4 controlled temperatures along the length of an alumina tube 0.5 inches (12.2 mm) outside diameter with a wall thickness of 1.5mm

 

Test Plan:

  • We will simply set the device where a dogbone would be and then inspect it with the thermal camera, the pyrometer, and other cameras.







Test 4:  Powder Test in sealed Alumina tube

Objectives:

  • Inspired by Rossi and then Parkhomov, we will continue our previous tests of a mix of Nickel powder and LiAlH4.  

  • By running these tests inside a calibrated dogbone, we should be able to achieve some adequate calorimetry if the effect is like Parkhomov reports.

Equipment:

  • Same as test 1 with addition of active fuel tube.

 

Set up:  essentially the same as in Test 1

 

Test Plan:

  • Take powder mix (already prepared from powder test in December) and insert into fuel tube, insert space filling rod, and seal with stainless Swagelok fitting and aluminum ferrules.

  • Attach pressure sensor if feasible.

  • Step up slowly watching for pressure releases and allowing time for absorption and gettering effects.

  • Bring up to 1200C or more and watch for higher than expected temperatures.



Tests 5, 6, 7, ...:  Powder Test in sealed Alumina tube

  • We iterate and try different ideas while we have the team assembled



Test X:  High Temp Inconel Heater Dogbone Calibration

  • Take feedback from crowd and perform a second calibration using a dogbone made with high temperature inconel heater coil and attempt to achieve a higher temperature.

  • Done in a manner similar to Test 1 with modifications suggested by the crowd




Frustrations so far:

We have already had our share of frustrations as we have prepared since Friday.  We have had to seek better and better computers to make a composite video stream with all the data streams in it.  The latest one is currently crashing occasionally.  We also have very limited bandwidth since we are in rural Minnesota and our DSLs are not performing as advertised.  We have struggled to understand why it appears that we have a very low emissivity reading from the pyrometer, and we are also struggling to understand why we are unable to log the data from the PCE830 on the computer like it is supposed to do.

 

Add comment


Security code
Refresh

Comments   

 
0 #138 Nicole 2023-07-28 03:48
Dzięki postępowi technologicznem u, branża ewoluowała,
aby sprostać wymaganiom współczesnych graczy, zapewniając wygodny i dostępny sposób na
oddanie się ulubionej rozrywce.

Look at my page Unibet Casino PL: netcallvoip.com/.../...
Quote
 
 
0 #137 white paper writing 2020-08-15 19:54
I have been surfing on-line greater than 3 hours nowadays,
yet I by no means discovered any interesting article like yours.
It is lovely worth enough for me. In my view, if all
site owners and bloggers made excellent content as you probably did, the
net will likely be a lot more helpful than ever
before.
Quote
 
 
0 #136 메이저안전놀이터 2019-08-03 19:56
Inspiring story there. What occurred after?
Thanks!
Quote
 
 
0 #135 ClayJuicy 2018-09-07 01:11
Hi. I see that you don't update your page too often. I know that writing content is time consuming and boring.
But did you know that there is a tool that allows you to create new
posts using existing content (from article directories or other blogs from your niche)?
And it does it very well. The new articles are high quality and
pass the copyscape test. Search in google and try:
miftolo's tools
Quote
 
 
0 #134 TeraJuicy 2018-08-13 08:04
Hello. I see that you don't update your website too often. I know that writing content is time consuming and boring.
But did you know that there is a tool that allows you
to create new articles using existing content (from
article directories or other websites from your niche)?

And it does it very well. The new posts are high quality and pass the copyscape test.
You should try miftolo's tools
Quote
 
 
0 #133 73Fermin 2018-08-01 20:30
I can see that your site probably doesn't have much traffic.
Your articles are interesting, you only need more new readers.
I know a method that can cause a viral effect on your blog.
Search in google: dracko's tricks make your content go
viral
Quote
 
 
0 #132 98Frederic 2018-07-16 10:38
I can see that your blog probably doesn't have much
visits. Your articles are awesome, you only need more new readers.
I know a method that can cause a viral effect on your site.
Search in google: dracko's tricks make your content
go viral
Quote
 
 
0 #131 moncler 2018-06-16 03:10
This is a great tip especially to those new to the blogosphere.
Brief but very precise information… Many thanks for sharing this one.
A must read post!
Quote
 
 
0 #130 LyleChief 2018-03-28 18:40
I have checked your site and i've found some duplicate
content, that's why you don't rank high in google, but there is a tool that can help you to create 100% unique content,
search for; boorfe's tips unlimited content
Quote
 
 
0 #129 Julissa 2018-02-20 01:34
Ich wirklich
Quote
 
 
0 #128 jayakarthick 2017-11-01 05:26
The toroidal winding machines has controlled by microcontroller in light of the way that it has ease program and control. This structure has secured for creator, heads and its speed can be controlled, which is animal key for minor windings. The controller can store the measure of assignments, which is sans offering functionalities to pick the required modes. The power shut down is may weaved in on the program ask for cutoff centers has recovered when the power may restored. Past what many would consider possible has specific for makers. Finally, it has made DC drive for winding motors and all drives and cutoff focuses have used single structure for decision board.Transform er tester
Quote
 
 
0 #127 jayakarthick 2017-08-30 05:42
The toroidal winding machines has controlled by microcontroller in light of the way that it has ease program and control. This structure has secured for maker, stars and its speed can be controlled, which is key for minor windings. The controller can store the measure of attempts, which is sans offering functionalities to pick the required modes. The power close down is may ricochet in on the program guaranteeing limits has recouped when the power may reestablished. Past what many would consider conceivable has particular for creators. At long last, it has made DC drive for winding engines and all drives and motivations driving control have utilized single reason board.Enameled Wire
Quote
 
 
0 #126 jayakarthick 2017-08-29 11:51
Toroid winding machine is having pulling in obsessions with toroidal structure and it other than vivacious winding machine. It contains a delightful ring or doughnut shape interfacing with get-together of ferromagnetic material like as overlaid iron, squash powder, around which wire is wound. This kind of winding machine has expected for sporadic layer windings. Routinely, the immense centralization of the toroidal winding machine has criticalness meter turns, transformer key bowing, high rehash of the toroidal circles and measure of changes may join into the windings in the take a gander at of time. By then it might use in the electronic circuit control supplies, speakers and inverters.toroi dal winding machine
Quote
 
 
0 #125 jayakarthick 2017-08-29 10:26
Amidst each of the six material may related in power application however every material has specific stunning conditions. The control material of MPP has utilized for most silly obsession stack, which translates rally with mollypermalloy powder centers and this may dazzling 'ol encompassed for flyback transformer, buckboost transformer. The doled out air opening of MPP centers is cover stray pulling in field and crippled people obliged disaster hitter included with gapped ferrite centers.Inducto r Winding
Quote
 
 
0 #124 jayakarthick 2017-08-28 12:21
The winding machine has kept up unmistakable relationship, for example, mechanical social occasion, materials and wire tries. A manual winding machine is having turn a turn and clients physically doled out the wires, ropes and particular materials. The client can deal with the turn speed and client has related the materials by hand and it might manage the weight and load secure.toroid winding machine
Quote
 
 
0 #123 jayakarthick 2017-08-28 10:24
The powder centers has doled out air obliged obsessions, which is on a to a striking degree major level passed on control inductor application particularly the SMPS yield channel is called one of the DC inductors in like course joined with differential inductors, help inductors flyback transformers and buck inductors. Scrambling powder center has taking after bit of fundamental zones, for example, , high resistivity, low hysteresis and vortex current fiascoesInducto r Winding
Quote
 
 
0 #122 jayakarthick 2017-08-28 06:14
The running with material of 75 sensible soundness focuses performing better than the koolmu focuses when ensure the lower focus fiascoes than Xflux and it contains with iron, aluminum and silicon. It giving lower cost other choice to high flux and overwhelming reestablish in focus scene.toroid winding machine
Quote
 
 
0 #121 jayakarthick 2017-08-01 06:26
The basic issue in the winding machines, which manual machines is not adaptable and it's requiring more unmistakable wander. In like way, the repair winding machines are performing unassumingly yet it requires all the more fundamental contraptions. Thusly, the weights has changed through make of reshape winding machine. Since, the machine has insignificant effort and it can be handle sensibly and it shape in little scale models.Slider
Quote
 
 
0 #120 jayakarthick 2017-07-31 11:14
A winding machine has included with metal wire, string or paper, onto an inside, spool, or bobbin, which are unmistakable sorts of bowing machines from direct manual administer machines to complex PC numeric control (CNC) machines. In light of current conditions, the titanic piece of the winding machines has turn winding, rope winding, and continuing on fiber winding. The winding machine has propped unmistakable relationship, for example, gear, materials and wire tries.Slider
Quote
 
 
0 #119 jayakarthick 2017-07-31 06:10
The bend winding machine speed levels has moved the most brilliant and execution. This sort of winding machine has fitting for transformer, inductors, engine and spreads. By then it might worked by a circle multifaceted nature, robotization mediations, creation levels and some other budgetary bits of knowledge. The fundamental issue in the winding machines, which manual machines is not adaptable and it's requiring more hypothesis.Tran sformer tester
Quote
 

Here is your generous contributions so far towards our $500,000 target, thanks everyone! : $45,020   Please Donate
See the current state of our booked costs here