FacebookTwitterDiggStumbleuponGoogle BookmarksRedditTechnoratiLinkedin

Welcome

The Martin Fleischmann Memorial Project is a group dedicated to researching Low Energy Nuclear Reactions (often referred to as LENR) while sharing all procedures, data, and results openly online. We rely on comments from online contributors to aid us in developing our experiments and contemplating the results. We invite everyone to participate in our discussions, which take place in the comments of our experiment posts. These links can be seen along the right-hand side of this page. Please browse around and give us your feedback. We look forward to seeing you around Quantum Heat.

Join us and become part of the project. Become one of the active commenters, who question our work and suggest next steps.

Or, if you are an experimenter, talk to us about becoming an affiliated lab and doing your work in a Live Open Science manner.

Username:
Password:
Remember me

Welcome to the New Fire Discussions

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

TOPIC: Hello and further info

#747 10 years 8 months ago
Hello and further info

DaveAtFernie's Avatar
OFFLINE
Karma: 0
Hi all,
It was great to see the setup at ICCF18. I mentioned when chatting to one of your gents that when using type K thermocouples you can find the dreaded green rot occurring on the thermocouple junction and wire.
There are sites that explain it a little however I'd recommend moving to a different thermocouple type or at least test for thermocouple drift.
I'm happy to discuss sensor technologies and replacements if you need any help.

Keep up the good work.

Dave
The administrator has disabled public write access.

#756 10 years 7 months ago
Hello and further info

bob's Avatar
OFFLINE
bob
Karma: 14
Thanks Dave,

The best person to discuss this with is probably Matheiu, send an email using the green "+" and we will hook you up.

Bob
The administrator has disabled public write access.

#758 10 years 7 months ago
Hello and further info

DaveAtFernie's Avatar
OFFLINE
Karma: 0
Hi Bob,
Was good to meet you last week (seems like forever ago).
Who were the people on the stand? I have a brief chat to the younger gent and both the ladies on the stand?

Dave
The administrator has disabled public write access.

#759 10 years 7 months ago
Hello and further info

mathieu's Avatar
OFFLINE
Karma: 0
We are not using external temperature monitoring to calculate the excess heat.
But it will be interesting to compare these thermocouple placed inside hydrogen with another identical thermocouple that was not immersed in such gas.
The administrator has disabled public write access.

#760 10 years 7 months ago
Hello and further info

DaveAtFernie's Avatar
OFFLINE
Karma: 0
It's just something to bear in mind that any sensors not designed for a reducing atmosphere such as type k and stainless steel shrouded sensors will eventually see their temperatures drift as they are attacked by hydrogen. An aluminium oxide sheathed platinum sensor would work, as would a different chemistry thermocouple. Even if it is just being used to set the temperature of the wires you'd see a drift over time.

Regards
David
The administrator has disabled public write access.
Powered by Kunena Forum