FacebookTwitterDiggStumbleuponGoogle BookmarksRedditTechnoratiLinkedin

Powder Cell

Powder Cell   Description:

 Cell with QSI nano powder

 Location: USA   USflag

 Project leader: Ryan Hunt

 Time span: June 2014 - Now

 Current progress: Experiment tests, changing parameters

 LIVE DATA
 Experiment Notes

Latest Video | Gallery | RSS feed of all comments

High Voltage Sparky Powder Cell

High Voltage SPARK CellDescription:

A first generation of nano powder cell activated by Dr. Stoyan Sargoytchev's (Sarg) sparker. This cell is very similar to the current working cell, containing nano nickel and hydrogen. We have removed the thermo well in the powder area and added a high voltage pass-through with a nickel electrode through the top.

Location: USA   USflag

Project leader: Ryan Hunt

Time span: July 2014 - Now

Current progress: Installed and Calibrating

 

LIVE DATA  Experiment Notes

Latest Video | Gallery | RSS feed of all comments

Pictoral Diagram

am .

 Sensor locations for Powder Calorimeter

RTD_1 (Cold): 2.4 cm from top flange
RTD_2 (Hot): 7.8 cm from top flange, reflects the temperature gradient inside the setup
TC_1 (Heater): Located between the outside of the reactor cell and the heater coil
TC_2 (Well): At the same level as TC_1, this is the part of the vacuum that is surrounded on the sides by the reactor cell
TC_3 (Outside): Located between the outer layer of the cell and the two layers of tubing
T_Amb: Ambient reading taken on HUGnet board approximately 4 ft from the cell
T_Top Flange: Located underneath the layers of small tubing on the surface of the top flange
 
Powder cell detail

Add comment


Security code
Refresh