<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom">
	<channel>
		<title>QuantumHeat.org</title>
		<description>Discuss QuantumHeat.org</description>
		<link>http://www.quantumheat.org</link>
		<lastBuildDate>Tue, 07 Apr 2026 23:06:21 +0000</lastBuildDate>
		<generator>JComments</generator>
		<atom:link href="http://www.quantumheat.org/index.php/de/component/jcomments/feed/com_content/115" rel="self" type="application/rss+xml" />
		<item>
			<title>Rita says:</title>
			<link>http://www.quantumheat.org#comment-27982</link>
			<description><![CDATA[I do not know if it's just me or iif perhaps everyone else encountering issues with your blog. It seems liuke sokme of the written text on your posts are runninng offf the screen. Can someone else please provide feedback and let me know if this is happening to them too? This could be a issue with my browser because I've hhad this happen previously. Appreciate it My webpage :: chiropractor Near me: https://Pressadvantage.com/story/67470-house-call-chiros-expands-mobile-chiropractic-service-in-gilbert-to-fitness-and-wellness-centers]]></description>
			<dc:creator>Rita</dc:creator>
			<pubDate>Wed, 30 Apr 2025 21:24:53 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-27982</guid>
		</item>
		<item>
			<title>Kendrick says:</title>
			<link>http://www.quantumheat.org#comment-27823</link>
			<description><![CDATA[Hurrah, that's what I was exploring for, what a material! presentt here att this weblog, thanks adkin of this website. Here is my web blog :: responsive Web design: https://Www.Pressadvantage.com/story/63562-custom-wordpress-website-designers-from-orangesky-websites-ready-to-offer-their-services]]></description>
			<dc:creator>Kendrick</dc:creator>
			<pubDate>Tue, 29 Apr 2025 22:32:46 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-27823</guid>
		</item>
		<item>
			<title>ZacharyAlarl says:</title>
			<link>http://www.quantumheat.org#comment-27398</link>
			<description><![CDATA[Подскажите где найти лучшие рецепты со всего мира: от классических блюд, которые согревают душу, до современных кулинарных шедевров, которые впечатляют даже самых взыскательных гурманов - https://hexagon.vn/2023/06/22/harnessing-the-power-of-social-media-for-business-growth - рецепты домашнего приготовления]]></description>
			<dc:creator>ZacharyAlarl</dc:creator>
			<pubDate>Sun, 27 Apr 2025 23:31:29 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-27398</guid>
		</item>
		<item>
			<title>SamuelTucky says:</title>
			<link>http://www.quantumheat.org#comment-25493</link>
			<description><![CDATA[Кракен сайт: Высокая скорость и безопасность | тор сайты магазинов купить лсд в россии - https://forumis.info/forum_card/0001/?PHPSESSID=ebaf7c209f642c2dfe67774c7933a4ae Новый в даркнете и хотите попробовать использовать КРАКЕН сайт? Это отличный старт для вашего путешествия по скрытым уголкам интернета. Чтобы безопасно и эффективно пользоваться KRAKEN сайтом, нужно знать несколько важных правил. От использования Тор-браузера до проверки отзывов — всё это поможет вам оставаться в безопасности. Читайте наш гид по использованию KRAKEN сайта на нашей платформе. Обмен криптовалюты через КРАКЕН зеркале всегда происходит с максимальной безопасностью. торговая площадка использует высококачествен ные методы защиты, чтобы предотвратить любые попытки взлома, включая шифрование данных и двухфакторную аутентификацию. Также рекомендуется использовать только проверенные и защищенные кошельки для транзакций, чтобы гарантировать дополнительную защиту ваших средств. Больше подробностей, как обеспечить безопасность обмена на КРАКЕН зеркало. магазин тор шоп - https://forum-actioncams.com Кракен онлайн-площадка мессенджер Telegram]]></description>
			<dc:creator>SamuelTucky</dc:creator>
			<pubDate>Mon, 21 Apr 2025 22:11:51 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-25493</guid>
		</item>
		<item>
			<title>Danielgop says:</title>
			<link>http://www.quantumheat.org#comment-24934</link>
			<description><![CDATA[Мега - это лучший вариант для покупки и продажи продуктов в онлайн-простран стве sb mega . Он является крупнейшей и наиболее известной анонимной торговой площадкой в СНГ. Здесь вы найдете большое количество магазинов и магазинов из разных стран, предлагающих широкий ассортимент позиций. Будь то электроника, одежда, аксессуары или что-то еще, Мега показываетвсе, что вам нужно. https://xn--m14-psa.com]]></description>
			<dc:creator>Danielgop</dc:creator>
			<pubDate>Sun, 20 Apr 2025 13:47:51 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-24934</guid>
		</item>
		<item>
			<title>Rickyrix says:</title>
			<link>http://www.quantumheat.org#comment-23136</link>
			<description><![CDATA[If you're a fan of Sherlock Holmes-style adventures, this Victorian-theme d casino slot will blow you away. Whether you're a casual player or a serious slot fan, this casino experience pulls you into its story with every spin. Every detail — from the reels to the background music — contributes to an unforgettable slot game experience. Play now and explore this story-driven slot game: https://www.wtcbarcelona.com/es/rtp-96-50-free-play/ Your next favorite online slot might just be this one — themed, thrilling, and full of surprises.]]></description>
			<dc:creator>Rickyrix</dc:creator>
			<pubDate>Wed, 16 Apr 2025 08:46:01 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-23136</guid>
		</item>
		<item>
			<title>XVerla says:</title>
			<link>http://www.quantumheat.org#comment-9262</link>
			<description><![CDATA[Hello buddy. It was hard to find this site in google. It's not even in top 10. You should focus on hq links from high authority sites in your niche. I know of a very effective free method to get strong backlinks and instant traffic. The best thing about this method is that you start getting traffic right away. For more info search in google for; masitsu's tricks]]></description>
			<dc:creator>XVerla</dc:creator>
			<pubDate>Fri, 31 Aug 2018 13:26:26 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-9262</guid>
		</item>
		<item>
			<title>Ged says:</title>
			<link>http://www.quantumheat.org#comment-191</link>
			<description><![CDATA[That unexplained power_in increase is strange. I wonder if something is happening to the heating wire, if it's resistance is going up. I found the equations I was looking for on Joule heating (aka resistance heating/ohmic heating) being that Q = I^2 * R (heat equals current squared times resistance). Since the Celani wire is not powered during loading, the culprit is probably the heating wire, maybe it is becoming a little brittle from the hydrogen (perhaps losing oxides, and thus becoming more resistant; since Nichrome has that chromium oxide layer). Those are just my thoughts though. This is some cool data guys! Too bad the power supply is being a little noisy, but at least it seems to be relatively minor and consistent fluctuations.]]></description>
			<dc:creator>Ged</dc:creator>
			<pubDate>Sun, 11 Nov 2012 17:54:11 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-191</guid>
		</item>
		<item>
			<title>123star says:</title>
			<link>http://www.quantumheat.org#comment-188</link>
			<description><![CDATA[Could you please say what calibration data you used to compute what you call "P_out" in the datasheet? For example if I "blindly" use data from Cal6 (the worst case) I no excess *temperature* even in T_mica! Using Power = 49.5 W I get T_rise_mica = 156 degrees which is more than ~ 152 degrees measured now. Being skeptical, I'd expect (with the same input power of course) - Hotter T_mica and T_well with the loaded wire w.r.t. the blank run - The same temperature on T_glassOut in both the blank run and loaded wire (i.e. from this I would conclude that there is no excess heat, as Cerron, Zeballos et al. did).]]></description>
			<dc:creator>123star</dc:creator>
			<pubDate>Sun, 11 Nov 2012 12:43:59 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-188</guid>
		</item>
		<item>
			<title>Ecco says:</title>
			<link>http://www.quantumheat.org#comment-185</link>
			<description><![CDATA[Regarding effect stimulation, have you considered PWM control of input voltage? It would be very interesting (and quite anomalous) if the reaction intensifies when using a duty cycle shorter than 100% (constant input).]]></description>
			<dc:creator>Ecco</dc:creator>
			<pubDate>Sun, 11 Nov 2012 11:26:13 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-185</guid>
		</item>
		<item>
			<title>freethinker says:</title>
			<link>http://www.quantumheat.org#comment-184</link>
			<description><![CDATA[Hi. Excellent stuff, again and again. br]]></description>
			<dc:creator>freethinker</dc:creator>
			<pubDate>Sun, 11 Nov 2012 11:23:27 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-184</guid>
		</item>
		<item>
			<title>Robert Greenyer says:</title>
			<link>http://www.quantumheat.org#comment-183</link>
			<description><![CDATA[Interestingly, these current spikes may actually stimulate the reaction when running in the active loaded wire - however, they are extremely small.]]></description>
			<dc:creator>Robert Greenyer</dc:creator>
			<pubDate>Sun, 11 Nov 2012 10:45:49 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-183</guid>
		</item>
		<item>
			<title>Robert Greenyer says:</title>
			<link>http://www.quantumheat.org#comment-182</link>
			<description><![CDATA[Hi Sanjeev and 123star, Thankyou for your attention and continued suggestions. Yes 300 corresponds to the number of layers. You can see Celani's paper here http://www.slideshare.net/ssusereeef70/celani-iccf17-trasp3 B]]></description>
			<dc:creator>Robert Greenyer</dc:creator>
			<pubDate>Sun, 11 Nov 2012 09:35:37 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-182</guid>
		</item>
		<item>
			<title>Ecco says:</title>
			<link>http://www.quantumheat.org#comment-181</link>
			<description><![CDATA[For next time I would suggest to adopt in these files an ascending ordering for data points (new ones on the bottom/ the end of file) rather than descending, and if possible to keep the time interval between each one constant so that one could use "counts" instead of handling directly time data for the X axis. It seems that sometimes between each data point there is a 3 seconds delay rather than 2. It might actually be less than that due to possible rounding errors, but it's still inconvenient for certain uses nevertheless. It might be an idea to not limit time precision to seconds.]]></description>
			<dc:creator>Ecco</dc:creator>
			<pubDate>Sun, 11 Nov 2012 09:28:36 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-181</guid>
		</item>
		<item>
			<title>Sanjeev says:</title>
			<link>http://www.quantumheat.org#comment-179</link>
			<description><![CDATA[If its due to fan then you can simply bypass the controls and keep the fan always on. But can also be a faulty capacitor because I can see the voltage/power rise slowly after the pulse. I saw the csv file but couldn't figure out which one is current because all columns are titled Power Channel.... Anyway all show the dip. It doesn't look so good but it can be averaged or integrated in excel. What does 300 layers mean? Will it also increase the output 3x ?]]></description>
			<dc:creator>Sanjeev</dc:creator>
			<pubDate>Sun, 11 Nov 2012 08:02:43 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-179</guid>
		</item>
		<item>
			<title>Ryan Hunt says:</title>
			<link>http://www.quantumheat.org#comment-178</link>
			<description><![CDATA[The data is posted. Feel free to examine it. The glass temperatures are rising along with the Mica temp and the thermowell in the longitudinal axis of the cell. Here is the graph. http://www.quantumheat.org/images/blog/data/H2loading_glasstemps_1.png The thermal image will have to wait till tomorrow. I'm up way past my bedtime.]]></description>
			<dc:creator>Ryan Hunt</dc:creator>
			<pubDate>Sun, 11 Nov 2012 07:17:36 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-178</guid>
		</item>
		<item>
			<title>123star says:</title>
			<link>http://www.quantumheat.org#comment-176</link>
			<description><![CDATA[An important fact: Did the authors of this experiment read Cerron-Zeballos , E., et al., Investigation of anomalous heat production in Ni-H systems. Nuovo Cimento Soc. Ital. Fis. A, 1996. 109A: p. 1645 http://www.lenr-canr.org/acrobat/CerronZebainvestigat.pdf They measured a hotter "rod" but no increase in the temperature casing! Subsequently, Piantelli in 1998 claimed an increase in the external casing, too but it's not very clear. See: http://64.142.106.183/v2/library/1998/1998FocardiS-LargeExcessHeatProductionNiH.pdf So, I'd say, focus on the external casing which is the "checkpoint" for heat flow. A hotter mica doesn't allow to conclude anything, IMHO.]]></description>
			<dc:creator>123star</dc:creator>
			<pubDate>Sun, 11 Nov 2012 06:56:37 +0000</pubDate>
			<guid>http://www.quantumheat.org#comment-176</guid>
		</item>
	</channel>
</rss>
